這是第二次來吃了! 在店外要拍張招牌的照片時被駐場人員阻止了^^
原來是禁止拍照的,不過食物主體是OK的!
點了主打的大蒜拳骨拉麵$160
SPI, I2C, and 1-wire Driver in Android Linux kernel
In the end of previous company, I got one job about writing one MCU driver using SPI interface on smartphone.
It's quite difficult for me because I got no idea about SPI before.
There are master/slave and lots of API of SPI host.
After reference lots of search results from web, I finish one SPI driver by several days.
If you are suffered in SPI, try this. It's a useful one in Chinese.
For I2C, I got one job just related to it.
It's about getting ADC from TI PMU using I2C.
This one is quite different because the exported API is already done the similar job.
Just need a simple modification to finish the requirement.
Most recently, I just got one request about 1-wire driver creation in my new company.
It would be a 1-wire driver for EEPROM that is used for some further detecting usage for smartphone.
I work on this couple days ago and become more familiar to 1-wire.
It's quite the same as SPI but need more modification to accomplish the whole work.
For my experience of SPI, the MCU vendor describe almost all the functionality of MCU and detail protocol that MCU communicates with CPU.
Because of that, the job become easier than the 1-wire driver to finish.
More, there is some authentication feature on this EEPROM that make it more complicated.
Now I just enable master that using GPIO and refer the existing 1-wire driver for EEPROM DS2431 to add slave.
After adding one family ID "4F", I could add 1-wire slave and read the 128KB content successfully but write fail....
I could just write it by the evaluation Kit from vendor and test the read function.
I just got the full version datasheet but it is quite complicated.
If they could describe it like MCU vendor or offer simple driver sample, that would be great help for me.
It's quite difficult for me because I got no idea about SPI before.
There are master/slave and lots of API of SPI host.
After reference lots of search results from web, I finish one SPI driver by several days.
If you are suffered in SPI, try this. It's a useful one in Chinese.
For I2C, I got one job just related to it.
It's about getting ADC from TI PMU using I2C.
This one is quite different because the exported API is already done the similar job.
Just need a simple modification to finish the requirement.
Most recently, I just got one request about 1-wire driver creation in my new company.
It would be a 1-wire driver for EEPROM that is used for some further detecting usage for smartphone.
I work on this couple days ago and become more familiar to 1-wire.
It's quite the same as SPI but need more modification to accomplish the whole work.
For my experience of SPI, the MCU vendor describe almost all the functionality of MCU and detail protocol that MCU communicates with CPU.
Because of that, the job become easier than the 1-wire driver to finish.
More, there is some authentication feature on this EEPROM that make it more complicated.
Now I just enable master that using GPIO and refer the existing 1-wire driver for EEPROM DS2431 to add slave.
After adding one family ID "4F", I could add 1-wire slave and read the 128KB content successfully but write fail....
I could just write it by the evaluation Kit from vendor and test the read function.
I just got the full version datasheet but it is quite complicated.
If they could describe it like MCU vendor or offer simple driver sample, that would be great help for me.
日本藍雙劍,玫瑰蝦,黑殼蝦,橘螯,金魚們...是我不好...
整理了上面這個大缸,計畫把所有日本藍雙劍給養在一塊兒了...
已經完全沒有心思好好像過去那般照料他們了...
寫文章的這個當下,這缸子裡頭已經擺進了日本藍雙劍6公4母,悠哉的游著
另外大約50隻的黑殼蝦進駐.
母橘螯,原先是給前一隻公橘螯作伴的,可惜他先走一步了..留下你一個人孤單寂寞...
不過黑殼蝦跟他共處的挺好,以前公橘螯可是會吃光光的!
訂閱：
文章 (Atom)